Product Description

1. Disentwine the special bolt of the C-bracket till the ringent distance is bigger than the thick of one

side of angle iron. And then tighten the special bolt M8; (Reference torque: 15Nm)

2. Please retire the nut onto the threaded rod ,and unclench the plastic clip;

3. Disjoin the plastic clamp,plunge the Fiber cable ofφ7mm orφ7.5mm into the small hole of plastic

clamp, plunge the 3.3 square or 4 square cable into the hole of the black rubber pipe in plastic clamp.

Remove the rubber pipe from the plastic clamp for the 6 square or 8.3 square cable and plunge the

cable into the hole of plastic clamp (figure right);

4. Lock all nuts at last. (Reference torque of lock nut M8 for clamp: 11Nm)

This Fiber Optic Cable Clamp is widely used for :

• Telecom cable
• Fiber cable
• Coaxial cable
• Feeder cable
• Hybrid cable
• Corrugated cable
• Smooth cable
• Braid cable

Technical data sheet:

Product Classification

Specification

Packaging & Delivery

Detailed Images